| OTDRs - Mini Hand Held Units |
Advanced and Basic Mini Hand Held OTDR Series
| Limited ONE-YEAR WARRANTY |
| Launch Cables/Pulse Suppressor Cables |
"A knowledgeable fiber optics technician will never use an OTDR without a launch and/or a receive cable!
Pulse Suppressors, commonly called Launch Cables, are used to occupy OTDR "Dead Zones" which enable accurate loss
measurements on near-end and far-end connections of the fiber under test. They basically allow the high power launch pulse a
"settling down" time prior to entering the fiber under test. Besides - you would not want to plug a bad connector into the top of
your expensive OTDR would you? Some OTDR's contain an internal launch cable. What would happen if you plugged a bad
connector into the top of your OTDR then. Results - SAME PROBLEM!
This compact suppressor/launch box/launch cable comes with your choice of connectors. Pigtails will exit the unit for easy
connection to both OTDR and fiber under test. When running an OTDR trace on multimode fiber the launch/receive cable should
be at least 250 meters long. When running a trace on singlemode fiber the launch cable should be at about 1k in length."
There is a 7-10 day lead time on this item. Be sure to specify what connectors you require on each end. Standard connectors
are, ST, FC, LC, and SC.
Pulse Suppressors, commonly called Launch Cables, are used to occupy OTDR "Dead Zones" which enable accurate loss
measurements on near-end and far-end connections of the fiber under test. They basically allow the high power launch pulse a
"settling down" time prior to entering the fiber under test. Besides - you would not want to plug a bad connector into the top of
your expensive OTDR would you? Some OTDR's contain an internal launch cable. What would happen if you plugged a bad
connector into the top of your OTDR then. Results - SAME PROBLEM!
This compact suppressor/launch box/launch cable comes with your choice of connectors. Pigtails will exit the unit for easy
connection to both OTDR and fiber under test. When running an OTDR trace on multimode fiber the launch/receive cable should
be at least 250 meters long. When running a trace on singlemode fiber the launch cable should be at about 1k in length."
There is a 7-10 day lead time on this item. Be sure to specify what connectors you require on each end. Standard connectors
are, ST, FC, LC, and SC.
P/N: LC-101-300MM
300 meters of Infinicor 300 - MM 62.5/125um bare fiber for Multimode testing.
Dimensions are 5" X 5" X 1.5" (Launch Box / Launch Cable) Must Specify
Connectors!
$325.00
300 meters of Infinicor 300 - MM 62.5/125um bare fiber for Multimode testing.
Dimensions are 5" X 5" X 1.5" (Launch Box / Launch Cable) Must Specify
Connectors!
$325.00
P/N: LC-201SM-1K
1,000 meters of SMF28e - SM 9/125um bare fiber for Singlemode testing.
Dimensions are 5.5" X 7.5" X 1.5" (Launch Box / Launch Cable) Must Specify
Connectors!
$368.00
1,000 meters of SMF28e - SM 9/125um bare fiber for Singlemode testing.
Dimensions are 5.5" X 7.5" X 1.5" (Launch Box / Launch Cable) Must Specify
Connectors!
$368.00
"One should never attempt to use a machine unless one knows and
understands how to use it - makes sense." Bob Ballard, RCDD
understands how to use it - makes sense." Bob Ballard, RCDD
| Find a Cabling Contractor Today! Visit Statewide Telecom |
| Doctor Fiber |
| "Do you know how to use these tools? If not, better get a dose of fiber at BDI DataLynk. They teach procedures . . . NOT OPINIONS!" |
| Home / About FOT / Contact / Tech Training / Industry News / Products / Services / Privacy Policy |
| Our Favorite Quick Links |
| Learn How To Use This Equipment Properly by attending Fiber Tech Courses From BDI DataLynk |
BASIC MINI Hand Held OTDR FEATURES
|
Certification Software Features
• Easy to Use
• Event Analysis
• Telcordia GR196 File Output
• Upload Via RS232 (USB Converter Available)
• Full Documentation
• Print Traces from Your Computer
• Supply Customer with Electronic and Hard
Copies
• Easy to Use
• Event Analysis
• Telcordia GR196 File Output
• Upload Via RS232 (USB Converter Available)
• Full Documentation
• Print Traces from Your Computer
• Supply Customer with Electronic and Hard
Copies
CERTIFY FIBER OPTIC INSTALLATIONS - The Mini-OTDR is a full-function Certifying OTDR when used with Certification Software. View and store
traces in the field, then download traces to a PC for further analysis and printing of the certification documents.
TEST FIBER TO THE HOME - The tri-wavelength model, which can test at 1490 nm, can be used to troubleshoot and test your Fiber to the Home
(FTTH) applications.
OPTIMIZE QUICK-TERMINATION CONNECTORS - Utilizing real time mode, attach the connector to a launch cable via a mating sleeve, then press
the Scan button on the OTDR. Slowly insert the fiber into the connector. The scan of the field fiber will rise up the screen as the optical connection
improves. The OTDR’s 2-point loss feature
shows the throughput of the connector.
traces in the field, then download traces to a PC for further analysis and printing of the certification documents.
TEST FIBER TO THE HOME - The tri-wavelength model, which can test at 1490 nm, can be used to troubleshoot and test your Fiber to the Home
(FTTH) applications.
OPTIMIZE QUICK-TERMINATION CONNECTORS - Utilizing real time mode, attach the connector to a launch cable via a mating sleeve, then press
the Scan button on the OTDR. Slowly insert the fiber into the connector. The scan of the field fiber will rise up the screen as the optical connection
improves. The OTDR’s 2-point loss feature
shows the throughput of the connector.
|
Note: Mini-OTDR units include power supply, certification software and RS232 cable kit.
WAVELENGTHS................................. 850, 1300, 1310, 1490, 1550nm, +/- 20nm
CONNECTOR TYPE........................................................FC or ST (SC on hand held version only)
DYNAMIC RANGE................................................................................................................... 23dB
DISTANCE ACCURACY...................................................................... +/- (1mtr + .01% x distance)
LOSS MODES.......................................................................................2 Point, Splice Loss, dB/km
GROUP IOR RANGE..................................................................................................1.024 – 2.048
VERTICAL EXPANSION.......................................................................................0.5, 1, 2, 4 dB/div
UNITS OF MEASURE...............................................................................................Meters/Kilofeet
PULSE WIDTHS.......................................................................................Short Pulse (SP) 4m/13ft
Medium Pulse (MP) 50m/164ft
Long Pulse (LP) 100m/330ft
DISTANCE RANGE...............................................................................1Km/3.3Kft 4Km/13Kft(SP)
4Km/13Kft, 16Km/53Kft(MP)
16Km/53Kft, 64Km/215Kft(LP)
DEAD ZONE...............................................................................................................................6m
DISTANCE INTERVAL ....................................................1m/3ft, 2m/6ft(SP), 4m/13ft, 8m/25ft(MP)
16m/53ft, 32m/105ft(LP)
HORIZONTAL EXP.....................16Km/32Kft, 8Km/16Kft, 4Km/8Kft, 2Km/4Kft/div (LP-Ext)
4Km/8Kft, 2Km/4Kft, 1Km/2Kft, 500m/1Kft/div (LP-Norm and MP-Ext)
1Km/2Kft, 512m/1Kft, 256m/512ft, 128m/256ft/div (MP-Norm and SP-Ext)
256m/512ft, 128m/256ft, 64m/128ft, 32m/64ft/div (SP-Norm)
DATA STORAGE.............................................................................................................255 traces
COMPUTER & PRINTER INTERFACE.................................................................................RS232
OPERATION TEMP ........................................................................................................ 0º - +50ºC
STORAGE TEMP.......................................................................................................... -40º - +60ºC
AC POWER................................................................................120/240 VAC charger/adapter incl.
BATTERIES........................................................................................................... 8 AA NiMH Cells
BATTERY LIFE......................................................................................................... 12 hours (typ.)
RECHARGER TIME.................................................................................................. 12 hours (typ.)
SIZE/WEIGHT - HAND HELD............................................................7.25” X 4.5” X 2.75” / 1.9 lbs.
CONNECTOR TYPE........................................................FC or ST (SC on hand held version only)
DYNAMIC RANGE................................................................................................................... 23dB
DISTANCE ACCURACY...................................................................... +/- (1mtr + .01% x distance)
LOSS MODES.......................................................................................2 Point, Splice Loss, dB/km
GROUP IOR RANGE..................................................................................................1.024 – 2.048
VERTICAL EXPANSION.......................................................................................0.5, 1, 2, 4 dB/div
UNITS OF MEASURE...............................................................................................Meters/Kilofeet
PULSE WIDTHS.......................................................................................Short Pulse (SP) 4m/13ft
Medium Pulse (MP) 50m/164ft
Long Pulse (LP) 100m/330ft
DISTANCE RANGE...............................................................................1Km/3.3Kft 4Km/13Kft(SP)
4Km/13Kft, 16Km/53Kft(MP)
16Km/53Kft, 64Km/215Kft(LP)
DEAD ZONE...............................................................................................................................6m
DISTANCE INTERVAL ....................................................1m/3ft, 2m/6ft(SP), 4m/13ft, 8m/25ft(MP)
16m/53ft, 32m/105ft(LP)
HORIZONTAL EXP.....................16Km/32Kft, 8Km/16Kft, 4Km/8Kft, 2Km/4Kft/div (LP-Ext)
4Km/8Kft, 2Km/4Kft, 1Km/2Kft, 500m/1Kft/div (LP-Norm and MP-Ext)
1Km/2Kft, 512m/1Kft, 256m/512ft, 128m/256ft/div (MP-Norm and SP-Ext)
256m/512ft, 128m/256ft, 64m/128ft, 32m/64ft/div (SP-Norm)
DATA STORAGE.............................................................................................................255 traces
COMPUTER & PRINTER INTERFACE.................................................................................RS232
OPERATION TEMP ........................................................................................................ 0º - +50ºC
STORAGE TEMP.......................................................................................................... -40º - +60ºC
AC POWER................................................................................120/240 VAC charger/adapter incl.
BATTERIES........................................................................................................... 8 AA NiMH Cells
BATTERY LIFE......................................................................................................... 12 hours (typ.)
RECHARGER TIME.................................................................................................. 12 hours (typ.)
SIZE/WEIGHT - HAND HELD............................................................7.25” X 4.5” X 2.75” / 1.9 lbs.
| SPECIFICATIONS |
Delux Mini Hand Held OTDR - Advanced and Basic
| "One should never attempt to use an OTDR without a Launch Cable." Bob Ballard, RCDD |
DULUX MINI OTDR FEATURES
|
The Deluxe Mini OTDR offers powerful testing capabilities for all types of optical networks. It is a compact and
durable instrument with an intuitive user interface suitable for operation indoors or in the field. This Mini OTDR
has the power and features necessary for both new technicians and advanced users. Select simple one button
testing for pass/fail results and length data. Experienced users will like the advanced event and trace features.
Includes Li-ion batteries, AC charger, USB cable, one interchangeable adapter for each launch port, and
analysis software. The hard case includes extra storage space for additional
accessories like launch spools, adapters and other hand-held test equipment.
durable instrument with an intuitive user interface suitable for operation indoors or in the field. This Mini OTDR
has the power and features necessary for both new technicians and advanced users. Select simple one button
testing for pass/fail results and length data. Experienced users will like the advanced event and trace features.
Includes Li-ion batteries, AC charger, USB cable, one interchangeable adapter for each launch port, and
analysis software. The hard case includes extra storage space for additional
accessories like launch spools, adapters and other hand-held test equipment.
| Limited ONE-YEAR WARRANTY |
DYNAMIC RANGE (LONGEST PULSE, 3MIN AVERAGE)....................................... 850nm-24dB
1300nm-25dB
1310nm-29dB
1550nm-28dB
PULSE WIDTH (ns)................................................................10, 30, 100, 275, 1000, 2500, 10000
LINEARITY dB/dB................................................................................................................ +/-0.03
EVENT DEAD ZONE @ –35dB REFLECTION.............................................................. 2.5 Meters
ATTENUATION DEAD ZONE @-35dB REFLECTION.................................................... 11 Meters
RANGE (KM)...............................................................................................................SM 0.65 TO 160
MM 0.10 TO 40
COMMUNICATION INTERFACE...........................................................................USB AND RJ-45
SIZE (HXWXD).................................................................................................. 9.9IN X 4.9IN X 3IN
WEIGHT (LB)..............................................................................................................................2.2
BATTERY......................................................................................................................LI-ION, 8HR
TEMPERATURE (ºC)...............................................................................OPERATING -10º TO 50º
STORAGE (ºC)............................................................................................................. –40º TO 70º
1300nm-25dB
1310nm-29dB
1550nm-28dB
PULSE WIDTH (ns)................................................................10, 30, 100, 275, 1000, 2500, 10000
LINEARITY dB/dB................................................................................................................ +/-0.03
EVENT DEAD ZONE @ –35dB REFLECTION.............................................................. 2.5 Meters
ATTENUATION DEAD ZONE @-35dB REFLECTION.................................................... 11 Meters
RANGE (KM)...............................................................................................................SM 0.65 TO 160
MM 0.10 TO 40
COMMUNICATION INTERFACE...........................................................................USB AND RJ-45
SIZE (HXWXD).................................................................................................. 9.9IN X 4.9IN X 3IN
WEIGHT (LB)..............................................................................................................................2.2
BATTERY......................................................................................................................LI-ION, 8HR
TEMPERATURE (ºC)...............................................................................OPERATING -10º TO 50º
STORAGE (ºC)............................................................................................................. –40º TO 70º
| SPECIFICATIONS |
Housed In
IMPACT
RESISTANT COVER
IMPACT
RESISTANT COVER
|
| Learn How To Use This Equipment Properly by attending Fiber Tech Courses From BDI DataLynk |
Delux Mini Hand-Held OTDR
|
Delux Mini Hand-Held OTDR Test Kits And Accessories
"To see and resolve
the connector at the
far end of a fiber
segment when using
an OTDR one MUST
use a Receive Cable."
the connector at the
far end of a fiber
segment when using
an OTDR one MUST
use a Receive Cable."
| The US Courts Project in Texas will prove to be one of the Largest 10Gig, FTTD Projects in Recent History. Project was Designed by BDI DataLynk and all Technicians Installing and Certifying the Project were Trained by BDI DataLynk. Read About it Right HERE! |
| Learn to Hold the Power of Light Within Your Finger Tips! BDI DataLynk Fiber Optics Training ... the only fiber optic network instruction you will ever need. |
| Teaching Procedures Not Opinions Since 1999. Prepare to Learn! |
| Need a job or short term fiber optics project? Visit Fiber Tech Jobs. Com |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| BEWARE of Companies with similar names with one or two letters different from ours as they: |
|